Symptoms

You may see a pop-up error:

Protect Setup:

Error 1603: A fatal error occurred during installation

Error 1605: This action is only valid for products that are currently installed.

Error 1612: The installation source for this product is not available. Verify that the source exists and that you can access it.

You may see a message that says "protectinstaller.msi was not found".

Purpose

This article provides information on manually un-installing Shavlik Protect. This document is generally meant for the purpose of cleaning up a bad or broken installation of the Protect application.

Cause

Occasionally, the application may not be removed completely due corruption to the Windows Installer, Installer folder or other corruption to the automated uninstall process. When this occurs a manual un-install of the application is necessary.

Resolution

You may need to use the steps below to perform a manual uninstall of the application, and then re-install as necessary.

Microsoft provides assistance with the manual uninstall process by providing a Fix it tool.  The link to the tool is:  http://support.microsoft.com/mats/Program_Install_and_Uninstall

Here are instructions on how to use the Fix it tool

1. Use the link above to navigate to the Fix it main page.
2. Click on ‘Run Now’ and choose ‘Save File’.
3. Run the EXE that is downloaded and choose ‘Accept’ on the first page.
4. Choose the second option ‘Detect problems and let me select the fixes to apply’.
5. Choose the ‘Uninstalling’ option
6. You will see a list of the installed products on the server.  Choose the product if you see it on the list for instance. ‘Shavlik Protect’.  If you do not see the product on the list then select ‘Not listed’.

If Shavlik Protect, vCenter Protect, or Netchk Protect is listed:

1. Choose the corresponding name and click ‘Next’.
2. Choose ‘Yes, try uninstall’
3. Verify both options are check-marked and click ‘Next’.
4. You should see a screen that indicates whether Protect was uninstalled or not.
5. Click ‘Next’ and the close out of the screen.

If Shavlik Protect, vCenter Protect, or Netchk Protect is Not Listed:

1. Choose ‘Not Listed’ and click ‘Next’.
2. Enter the product code for the version of the Product installed and click ‘Next’. (Include the brackets)

     Product codes for Protect are listed below.

1. Verify both options are check-marked and click ‘Next’.
2. You should see a screen where it indicates whether the product was uninstalled or not.
3. Click ‘Next’ and the close out of the screen.

Product GUID codes:

Make sure to use the corresponding GUID for the version of Protect you are attempting to uninstall.

Protect 7.0.832.0: {C6D1AE7C-DE93-4E93-A916-C4144525C82C}

Protect 7.0.841.0: {C6D1AE7C-DE93-4E93-A916-C4144525C82C}

Protect 7.1.410.0: {90047C28-0B1B-4B30-8177-50729907EBF2}

Protect 7.2.155.0: {9B7F1E45-4C47-4E25-9EAB-098923E4171C}

Protect 7.5.2716.0: {CEA2D643-08C0-422E-9B27-B58ED9D38D07}

Protect 7.6.1482.0: {661A3308-5BE2-4E0F-A752-BDDB247DD2DB}

Protect 7.8.1340.0: {0A4D8D5E-7177-4A45-8A7F-0A5757403F97}

Protect 7.8.1388.0: {0A4D8D5E-7177-4A45-8A7F-0A5757403F97}

Protect 7.8.1392.0: {0A4D8D5E-7177-4A45-8A7F-0A5757403F97}

Protect 8.0.3756.0: {F77AFB04-D13F-48DA-BB99-A5B31B6AAE0B}

Protect 8.0.3965.1: {5A696B05-9F06-4B3D-83A0-69E848EFAC4A}

Protect 8.0.4027.2: {5A696B05-9F06-4B3D-83A0-69E848EFAC4A}

Protect 9.0.1106.0: {8045AD29-C6A4-43F5-9F1F-9560EB09F99A}

Protect 9.0.1182.0: {070964CB-00B0-4E36-A3F6-A09F76FBD197}

Protect 9.0.1182.0  {B7F5FF6F-382B-8834-3B85-B6390F7F4DA1}

Protect 9.1.4334.0: {83593D3F-ADD7-491B-82EC-1A2E6D08C385}

Protect 9.1.4472.0: {83593D3F-ADD7-491B-82EC-1A2E6D08C385}

ScriptLogic Patch Authority Ultimate 8.0.3756: {A8210996-CD25-4C8C-A2D7-207635DEDC28}

ScriptLogic Patch Authority Ultimate 8.0.4027: {86DE6110-3F1C-40EE-98D9-05CD7A4B212F}

ScriptLogic Patch Authority Ultimate 9.0.1182: {0EAD1B8A-6F58-2304-A817-34C1724CE04C}

At this point, install the latest version of Protect.

If you continue to encounter any install errors, contact Shavlik support. (http://www.shavlik.com/support/contact/)

If the Fixit tool fails to correct the error, you may need to manually delete an upgrade key located under HKEY_CLASSES_ROOT\Installer\UpgradeCodes in the registry. Then try reinstalling Protect with the latest installer.

Latest versions of Protect can be downloaded from: http://www.shavlik.com/downloads/

It is highly recommended to perform a backup of the registry before performing any modifications.

How to backup Windows Registry:  http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

Impact / Risks

The Fixit utility is provided by Microsoft. Make sure you read any known issues or guidelines for this tool on Microsoft's site prior to use.

Affected Product(s)

Shavlik Protect 9.x